|
PUMPS - NEW - AXFLOW PUMPS
Blackmer
Today, Blackmer is the world's leading manufacturer of rotary-vane pumps. They offer the best combined characteristics of sustained high level performance, energy efficiency, trouble-free operation and low maintenance cost. Blackmer pumps are widely used by
the U.S. defence agencies, and have long been the preferred technology for transfer, transport and delivery of petroleum products and liquefied gases. Blackmer's unique sliding-vane design is now recognised world-wide for handling industrial process fluids, Volatile or Organic Compounds, abrasive slurries and viscous liquids.
Coppus
A wide range of Coppus energy-conserving, high performance portable ventilators for confined space ventilation, fume removal, process and personnel cooling.
A choice of fan drives - compressed air, electric, steam, water, engine or hydraulic fluid, with hazardous location options.
Accessories include ducting, tripod mounts, transport carts and heater units.
Mono Pumps
Mono Pumps
The progressing cavity pump principle is ideal for handling liquids that can be slurries, viscous, shear sensitive, 2 or 3 phase mixtures or when applications require significant suction lift capabilities.
Mono is unique in having manufacturing and distribution plants in 3 countries, U.S.A., U.K. and Australia, supported by our distribution company in New Zealand. Our range of progressing cavity pumps are supported by an extensive worldwide distributor network.
The principle inherent in the pump design is ideally suited for both low to high flow applications. The heart of the Mono pump is the rotor and stator. As the single helix rotor revolves eccentrically within the double helix of the stator, a continuous cavity is formed and progresses towards the discharge end of the pump as the rotor rotates.
Wilden Pumps
Wilden Pumps are the largest manufacturer of Air Operated Double Diaphragm Pumps and partnered with AxFlow offer the best technical solutions to your Fluid Handling needs
The Wilden Pump is available in seven sizes (?" to 4" inlet) for flows to 1040 liters per minute (275 gpm). A wide variety of construction options are available to meet virtually any application requirement. The Wilden pump can handle pressures up to 8.6 Bar (125 psig) and temperatures to 176.7° C (350° F). Materials of construction include:
Aluminum, Cast Iron, 316 Stainless Steel, Hastelloy®, Polypropylene, PVDF, carbon-filled Acetal, Teflon® PFA, and Teflon® PTFE.
Wildens line of pump accessories enhance and protect your liquid process as well as add value to it. Whether you need a surge dampener to minimize pressure fluctuation, or an electronic controller to automate your pumping process, these accessories allow your Wilden pump to easily adapt to your specific application environment.
Waukesha WCB
Waukesha Cherry-Burrell positive displacement pumps
Waukesha Cherry-Burrell is a world-class manufacturer of positive displacement pumps.
If you need a pump for your dairy, food ,sugar, beverage, cosmetic, ice cream, pharmaceutical, chemical, starch, paint, or other industrial applications Waukesha has the right pump for you.
The more than 50 years experience assures the right choice for the most difficult applications.
We have the solution for the "unpumpable" products, like cold cheese, chewing gum or meat.
The unique twin- or single blade alloy 88 rotor design handles shear sensitive products, like yoghurt, jam with fruit particles, whey, or blood very gentle without damaging the product.
The Bio-Flo, Aseptic, or starch pump designs are for specific applications, like aseptic fruit processing, pharmaceutical or very abrasive applications.
Waukesha pumps are EHEDG certified.
Below you can make a selection to see more about the specifics of the different Waukesha PD-pump series
Wernert
Plastic lined Centrifugal Pumps
'Your partner for handling problematic fluids'
Be it aggressive, abrasive, or toxic media – WERNERT provide the appropriate centrifugal pump made from non-metal materials. e.g. UHMW-PE, PVDF, or PTFE. Our plastic pumps satisfy the highest security and quality specifications, including ATEX.
WERNERT has a long standing tradition of being highly innovative. The first centrifugal pump made from plastics in the world was launched by WERNERT as early as 1927.
This is continued today with the leading WERNERT pumps – e.g. with the world-wide most advanced pump concept TAIFUN, or the patented grinding pump.
Fast response times, profound consultancy, and a comprehensive repair service together make up our global service offer.
Zenith Pumps
Zenith Pumps offers pulseless, repeatable metering pump systems for the chemical process, polymer synthesis, and synthetic fiber industries. Pumps are suitable for high viscosity, high pressure, and high temperature applications. We offer pumps for handling corrosive liquids, abrasive slurries, and other fluids that are difficult to handle with other metering pumps. Zenith also offers closed loop systems with integral flow meter and precision planetary gearheads for servo motor and stepper motor speed reduction applications.
|
